Galvanised Corrugation Roof Sheets/Galvanized Corrugated Steel Roofing Tiles

1. Galvanized corrugated steel roofing tiles introduction
It is one of the most corrosion resistant corrugated materials offered in the architectural roofing and
siding panel market. Unlike normal galvanizing, this metal material is an actual combination of aluminum and zinc to provide excellent protection




2. Galvanized corrugated steel roofing tiles application scope
Most commonly used for commercial, agricultural, and industrial purposes, however, it is now also
being recognized as an excellent form of residential roofing. Corrugated steel sheet is also known
as sinusoidal, corrugated iron or wriggly tin



3. Galvanized corrugated steel roofing tiles main features
1) Combine the excellent barrier corrosion protection of aluminum with the galvanic protection of zinc
2) Preferred product for long-term resistance to atmospheric corrosion
3) Superior corrosion resistance
4) Easy to install, high strength and lower costs
5) Widely used as walls or roofs for factories, warehouses, garages, exhibition centers



4. Galvanized corrugated steel roofing tiles installation tips
1)Prepare roof surface by removing old roofing, rotten wood,adding roofing felt to the entire surface
2)Calculate the number of sheets of corrugated metal needed. Divide the area of your roof by the
size of the sheets you will be using
3)Place your first metal sheet in a corner of the roof, flush against the surface
4)Nail in the first metal sheet to the wood of the roof
5)Place the second metal sheet alongside the first with an overlap of 3 to 4 inches (10 cm)
6)Nail the second metal sheet to the roof



5. Tools you'll need when install galvanized corrugated steel roofing tiles
1)Sheets of corrugated metal 2)Metal ridge caps 3)Roofing felt (if needed) 4)Nails
5)Hex screws 6)Washers 7)Hammer 8)Drill
 

Product	Galvanized Corrugated Steel Roofing Tiles
Base material	Hot dipped galvanized steel sheet   Hot dipped galvalume steel sheet
Material Grade	SGCC / SGCH / DX51D+Z / DX51D+AZ, etc
Thickness	0.15-0.60mm
Width before corrugation	1000mm , 1200mm
Tolerance	Thickness: +/-0.02mm   Width:+/-2mm
Zinc-coating	60g/m2-275g/m2(G30-G60).
Technique	Raw material: Hot rolled steel coil --> Cold rolled_>hot dipped   galvanized _>corrugated
Terms	Raw material width 762mm, after corrugated width 665mm: 9 waves.   Raw material width 914mm ,after corrugated width 800mm:11 waves.   Raw material width 1000mm, after corrugated 890mm or 900mm :12  or    14 waves.
Feature	Roofing Steel Sheet have excellent performance of decoration,   corrosion resistance etc.
Export package	Waterproof paper, galvanized steel covered and steel strip packed