Shandong Jinlong Waterproof Technology Co., Ltd. >> 1.0mm-2.0mm PVC Waterproof Membrane with Fabric Reinforced

1.0mm-2.0mm PVC Waterproof Membrane with Fabric Reinforced

1.0mm-2.0mm PVC Waterproof Membrane with Fabric Reinforced
Price: US $ 1.5-7/Square Meter
Min Order: 2000/Square Meter
Pay Type: L/C,T/T,Paypal


Production Information
 
pvc waterproof membrane with fabric
PVC plastic roll roof 1.0/1.2/1.5/2mm is an excellent high-quality polymer waterproof sheet, made of PVC resin by adding plasticizer, anti-UV agent, anti aging agent, and stabilizer and other processing aids through extrusion and molding. As the highly-recommended product by the Ministry of Construction, it is featured by high tensile strength, great elongation, good stability, small shrinkage, low-temperature performances, good resistance to weathering and root penetration, and long service life.
H ( homogeneous polyvinyl chloride plastic waterproofing sheets ) is the principal material used on exposed roof applications, in vacuum or mechanically attached systems. These roofing systems are suitable for new build and refurbishment applications,flat and pitched roofs. It is reliable, and convenient for construction.
L ( polyvinyl chloride plastic waterproofing sheets backed with fabric ) is manufactured from pliable PVC with a reinforcement of non-woven polyester. The PVC contains stabilizers, which make the product resistant to high and low temperatures, UV-resistant and makes it flame retardant.
P (polyvinyl chloride plastic waterproofing sheets internally reinforced with fabric ) is a laminated polyester fleece (or glass fiber fleece) on its interlayer and can be installed directly on old roofing underlay.
We recommend that all roofs have an inclination of minimum 1:40 to provide positive drainage.
G Polyvinyl chloride plastic waterproofing sheets internally reinforced with glass fiber.
Add the Short cut glass fiber or Glass fiber non-woven fabrics in the sheet, on the mechanical properties such as tensile properties had no significant effect, only improve dimensional stability.
GL Polyvinyl chloride plastic waterproofing sheets internally reinforced with glass fibers and backed with fabric.
Add the Short cut glass fiber or Glass fiber non-woven fabrics in the sheet, and non-woven fabrics such as polyester composite membrane under the polyvinyl chloride plastic waterproofing sheet surface. The products in special specifications can be customized.
 
Specification
 
pvc waterproof membrane with fabric
Thickness: 1mm, 1.2mm, 1.8mm, 2.0mm, 2.5mm
Width: 2.05M,2.1M, 1M or customized
Length: 10M, 20M, 25M
Colors:White, Dark grey, Light grey, Black, Blue, Red, and Copper green.
Depending upon roof area, membrane material can also be produced in special customized colors.
 Features

1. Long service life and weathering resistance; and the materials can be used for 30 years on the roof and 50 years underground. 
2. High tensile strength, great elongation, and small size change during heat treatment. 
3. Good low temperature flexibility and adaptability to environmental temperature changes.
Good resistance to root penetration. It can be made for green roofs.Excellent resistance to puncture and impact. 
4. Convenient for construction (can be welded), solid and reliable, and Eco-friendly. 
5. Strong resistance to chemical corrosion, suitable for special occasions. 
6. Good plasticity, convenient and quick corner detail treatment. Easy maintenance and low cost. After 2,000 hours of manual weathering verification. 
 
Note:
Due to unique product formulation, the product has the longer life far beyond the usual waterproof material.
The entire water system is over 30 years on the roof and 50 years underground. It is widely used in construction and civil engineering.
 
Construction
pvc waterproof membrane with fabric
1.Clean the primary surface debris, debris. Base Paving screed is primary waterproofing membrane, waterproofing
membrane to provide a smooth, dense, there is strength to the bonded structure grassroots
2.The PVC waterproofing membrane by elastic line control position arranged on the base.
3.Find the best position of membrane on base, then lets Membrane keep straight, without distorting, lap width of 120mm,and appropriate cut.
4.Use PVC Glue(brush about 1mm) on the clear base and full sticky, then Paving the membrane on the glue, and planish. 
5.Overlapping side edges need use welding machine to weld them together.
 1.2-2.0mm homogeneous pvc waterproof membrane for roofing1.2-2.0mm homogeneous pvc waterproof membrane for roofing



 
Package Shipment
 

 
Prod Model: CL-L49
Width: 1m, 2m,2.05m,
Length: 20m
Elongation: 250n
Low Temperature: -20 Degrees
Tensile Strength: 9MPa
Weight: 1.68kg/M2-3kg/M2
Product Name: PVC Waterproof Membrane with Fabric
Type: Roofing and Waterproofing
Ceiling Tile Shape: Roll
Material: PVC
Thickness: 1.2mm
Ceiling Tile Type: PVC Ceilings
Surface Treatment: Roll Coated
Function: Waterproof
Certification: MSDS
Color: Grey
Usage: Indoor
Our company offers a range of high quality waterproofing solution-based products especially for the professional. Our main products including: SBS/APP modified bitumen waterproofing membranes, Self Adhesive Bitumen waterproofing membranes, Self adhesive Bitumen Flashing Tape, Self adhesive butyl waterproofing tape, PVC/TPO/HDPE/EVA waterproofing membranes, Polymer compound Waterproofing Membrane, Liquid bitumen coating, etc, our company also export Non woven polyester mat for bitumen membranes, Glassfiber mesh compound mat for bitumen membranes, Glassfiber mesh, Modified Bitumen Membrane production lines, etc

Honest is our business policy, quality and service first.

The key of the successful activity in the high quality of research and controls before, during and after production.
More >

Other Valve Products with This Manufacturers