1. Character of Microcrystal Wear resisting Alumina Lining:
According to different customers'needs, raw materials of the prodcuts are strictly controlled in order to ensure that the product not only takes on good wear-resistant, corrosion-resistant, but also rich size. The service life can be extended at least five years, which is 15% more efficient than a rubber liner. Also, it prevents pollution to the grinded material and increases the capacity of mill ball, resulting in cost cut.
2. Application:
(a)As wear-resisting lining of coal-electing equipment on coal industry
(b)As lining of fall funnel, lining of wear-resisting pipe and bender, etc. Parts of equipment in themal or power plants
(c)As lining of material tranfer pipe and chute, etc, on steel industry.
3. A set of wear resisting alumina tile:
(a)Microlite wear resisting alumina lining pieces
(b)Microlite wear resisting alumina perforated lining plate/tile
(c)Microlite wear resisting alumina Arc lining Plate/tile
(d)Microlite weat resisting alumina Trapezoid lining plate/tile
4. Rich size of wear resisting alumina tile
Length(mm)× Width(mm)× Height(mm)
(a)10 * 10 * /4-10
(b)17.5 * 17.5 * /4-10
(c) 20 * 20 * /4-10
(d)120 * 80 */10-20(Wear-resisting Perforated or Non-Perforated Lining Board)
(e)110 * 37/34 * 12(Wear-resisting Pipe(Traperzoid)Lining Board)
(f) 130 * 50/47 * 12(Wear-resisting Pipe(Traperzoid)Lining Board)
(g)150 * 100 * /10-25.4(Wear-resisting Perforated or Plain Lining Board)
(h)150 * 60/57 * 10/12(Wear-resisting Pipe(Traperzoid)Lining Board)
(j) 100 * 81.6/78.5 * 20(Wear-resisting Arc Lining Board)
Remark: Can volume-produce according to the customers' requirements.
| Performance Index | 92 series | 95series |
| Al2O3 (%) | ≥91.5 | ≥94.5 |
| Moh’s Hardness | 9 | 9 |
| Water Absorption Rate(%) | 0.02 | 0.02 |
| Fracture Toughness(Mpa) | 3.65 | 3.75 |
Bending
strengh(Mpa) | 255 | 275 |
| Bulk density(g/cm 3 ) | ≥ 3.60 | 3.65 |
Lianyungang Zhong Ao Aluminium Co. Ltd (AIZA)
Our Products:
Alumina Ceramic Ball
Alumina Ceramic Lining
Alumina Ceramic Cylinder
Alumina Wear Tile
Alumina Ceramic Beads
Alumina Ceramic Nozzle
Alumina Ceramic Ring
Insulation Ceramic
Customized Heterotypic Technical Ceramics
AIZA is a Lianyungang based Sino-Foreign joint venture corporation. It is a Chinese producer of calcined alumina and a manufacturer of alumina ceramics, such as alumina ceramic ball, alumina ceramic cylinder, alumina wear tile, ceramic insulator, ceramic element, ceramic beads, and other insulation ceramics with self-prepared material as well as German and Japanese material.
Since its creation, AIZA has served most of Chinese customers, Nanjing Huade, Zhuzhou Xianghuoju, and Chaozhou Sanhuan, which are eminent manufacturer of spark plug and advanced ceramic in China. Its "TCH" brand calcined alumina is well accepted by our customers.
In 2008, AIZA purchased 70 key equipment from Shanghai Morgan Matroc after its closure in China. The equipment includes isostatic press machine, dry press machine, hot press cast machine, ball mill, alumina spray prilling tower (centrifugal and pressure), polishing machine, etc. The equipment has been successfully installed in our factory by the end of 2008. Now, AIZA have succeeded in establishing itself as sole Chinese manufacturer of ceramic nozzle by isostatic dry bag pressing process. Besides, the most experienced technical engineer of former Shanghai Morgan Matroc also joined us, which is the precious source of our confidence of ensuring products quality.
TQC Procedures and ISO 9001: 2000- Certification
Our experienced QC will supervise the production and check the quality before delivery. We conduct TQC procedures according to ISO 9001: 2000-certified guidelines. In order to ensure better quality, we carry out five processes below:
1. Material inspection
2. Semi-manufactured goods inspection
3. Itinerary inspection
4. Finished products inspection
5. Shipment inspection.
Material Adopted:
Alumina
Zirconia
Steatite
Alumina-Zirconia
Technologies Adopted:
Dry Pressing
Isostatic Pressing
Heat Press Cast
Flowchart of Customized Service: Drawing Received---Researching and Tooling---Sample Collecting and Testing---Sample Accepted---Order Confirming.
